Salt Cell Cleaner

Description

Over time a build up of mineral deposits can attach to salt cell generator electrolyte plates. Salt cell cleaner is an effective way to clean up and de-scale the salt cells. Regular cleaning with Salt Cell Cleaner will help prolong the life of the cell, allowing the generator to operate at peak efficiency.

Directions for use: It is strongly recommended to use rubber gloves and eye protection when handling Salt Cell Cleaner solution. This product can be used for swimming pool or hot tub cells.

Quick 10-20 Minute Clean:

1. Turn off power to pump and salt generator cell. Disconnect cell from plumbing line.
2. Attach one end of the cell to cell cleaning stand so the cell is vertical with the open end facing up OR place entire cell in a plastic container for soaking OR cap one end of cell if it cannot be removed from plumbing line (refer to manufacturer instructions.)
3. Fill the inside of the cell (OR the plastic soaking container) with 1 Litre of Cell Cleaner. If the cell plates are not completely submerged, add water slowly until plates are submerged.
4. Let stand for 10 to 20 minutes. Then, remove the cell from the soaking container or drain the cleaning solution from the cell into a plastic container.
5. Inspect the cell, and repeat if scale (light color, crusty, flaky deposits) have not been removed.
6. Thoroughly rinse the cell with fresh water. Reconnect the cell to the plumbing and restart the pump, filter and generator.